1.Canopy Light Dimension:
2.Canopy Light Specification:
|Model||Wattage||Voltage||LED Type||LED Q'ty||CCT||Lumen||Angle|
3.Canopy Light Remarks:
1.LED Type options:CREE/Philips/Osram;Ra≥70；
2.Lumen is based on the condition of Ta<25℃ with a tolerance of ±10%；
3.Operating temperature:-40 to 50℃;Storage temperature: -40 to 70℃;
4.Canopy Light Advantages:
ADC12 aluminium alloy Die casting housing,
mecury free,lead free.
Quality LEDs with 180lm/w efficiency low
lumen decay.TJ<85℃,driver PF:0.95.
Easy insallation;1-10V Dimming.
Outdoor powder coating finishing,environmental protection powder material,High temperature resistance,corrosion resistance.
5.Canopy Light Dialux simulation:
6.Canopy Light Installation:
1.Fix the mounting bracket on ceiling with ST4-4.8*40 self-tapping screws.
2.Hang the fixture on bracket,make sure the backoff insert the slots.
3.Follow the red arrow and move the fixture.
4.Fix the safety cable with ST4*30 self-tapping screws.
1.Fix the mounting bracket on ceiling
with ST4-4.8*40 self-tapping screws.
2.Hang the lamp on the bracket,make
surethe backoff insert to the slots.
3.Follow the arrow to lock
the lamp on the bracket.
4.Fix the safety rope on the ceiling
with ST4*30 self-tapping screws,
make sure the lamp installed well.
Other installation option:
1.Unscrew the fixture.
2.Open the four knock-down holes by tool.then screw the fixture on ceiling(shown as picture)
3.Connect the wires.then install the reflector and PC cover(shown as picture)
1.Indoor & half-outdoor lighting;
2.Suitable for garage;corridors of hotel,hospital,restaurant;toll station,service station.